| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-26-2010, 12:28 AM
| |||
| |||
Hello Members. How to interface Haidenhain TNC370 control to Computer using RS232 using TNCremo. One side from Control to PC is properly communicating while data is not being transferred from Machine to control. I have checked cable connection and are OK. because this cable is working on the other machine having control TNC407. TNC407 support LSV2 protocol but TNC 370 support ME and FE. How to solve the problem. What should be the values of parameters. Advance thanks for ur kind attention.  |
|
#2
02-14-2010, 02:12 AM
| |||
| |||
| Start the TNCserver under TNCremoNT. Or you can start the server alone. All the communication commands (send / receive) is done on the TNC370. Or you can change the whole control to iTNC530. That´s what I did. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Bridgeport 1000/22 TNC370 Lube Cycle Parameters | BetaBob | Bridgeport and Hardinge Mills | 5 | 07-07-2009 12:07 AM |
| Communication issue with a EZ Track DX with Computer | biker_eh | Bridgeport and Hardinge Mills | 4 | 10-26-2008 07:43 AM |
| Setting up computer/machine communication | MrWild | Dolphin CADCAM | 0 | 06-03-2008 06:56 PM |
| Problems connecting laptop to TNC370 | iknownothing | Bridgeport and Hardinge Mills | 2 | 01-24-2008 06:26 AM |
| machine communication coreldraw11-12 | hpc laser u.k | Machine Problems, Solutions , Wireless DNC, serial port | 2 | 06-28-2007 08:21 AM |
| | |
Linear Mode
