Need Bridgeport EZ-Track G-Codes to build post

[MrMudd]

I would love to get a copy of this PDF as well. We are using the version 7.0 Software (last EZtrak Version) I had to create a custom post processor for Surfcam Velocity. And would like to know some better do's and dont's. I have been wanting to incorporate Cutter Comp without having to repost a comp adjustment from Toolpath file (Making a new post) I would like to incorporate the machines Compensation, since it does not use a tool Offset Database.

Any tricks to this?

glenn.lacefieldplastic@gmail.com

[MrMudd]

I found Today that G98 Does Not work with Ver 7. Ez trak BMDC

I had used Surfcam to layout a repeating Pattern and then had multiple drill points in a canned cycle.

The error i received was "bad Sequence" I tracked it down to "G98" Removed all g98 calls and it worked.

Still modifying my post processor, but it is slowly getting better.

Now im trying to figure out how to create a method of doing cutter comp....