| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-14-2010, 08:59 AM
| |||
| |||
We have a Bridgeport / Romi EZ path 1 that has been sat idle for 2 years, I replaced the CMOS battery and the bmdc software now loads. Trying to home the machine triggers an Alarm; "following error limit exceeded". Does anybody have any ideas what could be causing this? Last edited by qtech; 01-14-2010 at 11:14 AM.  |
|
#2
02-12-2010, 09:48 PM
| |||
| |||
| you have an error greater than like .005 I think it is between the requested move and the reported distance. could be an encoder, cable or amplifier. Does the X axis home ok? or does it alarm out shortly after you hit the + do move key for homing? Tim |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie- Part Home vs. Machine Home | Mihelich | G-Code Programing | 6 | 06-07-2009 01:56 PM |
| Need Help!- Home again Home again Jiggety Jig. Well Not Just Yet! | Mr.Chips | DIY-CNC Router Table Machines | 10 | 03-18-2008 08:58 PM |
| EZ TRak DX w/flash drive will not home | ataylor_316 | Bridgeport and Hardinge Mills | 7 | 07-01-2007 06:01 PM |
| EZ-Trak series II is always 0.100 off home after shutdown | sdey | Bridgeport and Hardinge Mills | 3 | 01-14-2006 09:10 AM |
| EZ-TRAK DX-II will not home | zukes3140 | Bridgeport and Hardinge Mills | 12 | 07-26-2005 04:54 PM |
| | |
Linear Mode
