I need help - BRIDGEPORT BPC-320H

[isaacmor]

Does anyone use
BRIDGEPORT BPC-320H Fanuc 0M
Please let me know (I need some help).
galmor@netvision.net.il

[machintek]

I have installed a few beginning with a 6MB control. The last ones had the 0M. Do you have programming, operating or service issues?

George

[Fireflowers]

Hi,
I have two BPC 320's with Fanuc6MB. The second one is being reconditioned by myself..New Z-axis rails and disc springs on the table and spindle.
Just out of interest these were made by Yasda in Japan and started life as YPC 320's !
I have a 512MB upgrade on the first one (Memex MME Memory engine) which works great! Would recomend this upgrade as the standard 32K isn't much use!!
These machines can not be drip fed but a BTR can be supplied by the same company.
Considering upgrading to 7000 RPM but am unsure what size of pulley I need and how to adjust the parameters to suit the uprated rpm.
Any help would be appreciated...!
Pleas ask me any questions on this machine, I'de be happy to help..
Cheers, John.

[bungle]

hi there im looking to change the z axis rails on my bpc 320 om control ,do you have part no's for the rails and carriage made by thk

many thanks

bungle

[tariqfayyaz]

My BPC320H has spindle servo alarm. On servo board led light #4 is ON.what could be the problem