| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-01-2009, 05:05 PM
| |||
| |||
I have a CNC R2E4 that seems that all this well, but when I typing and I give to execute this alarm appears, "low byte parity error" I have just changed the card BSP because not to send at home and appeared this alarm "Cannot Sync with SFP Card, link may be dead" but already was resolved changing the card BSP but now I have this another "low byte parity error" someone can help me
__________________ Have a Nice day  |
|
#2
11-01-2009, 08:04 PM
| |||
| |||
| First CLEAR ALL programs and tool tables. Make sure back up batteries are good. Retype program and reload tool table. Hope that fixes it. George
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- fanuc 10T ram parity error | jolulank | Fanuc | 14 | 01-04-2012 04:23 AM |
| 10T Ram Parity Error | grease | Fanuc | 3 | 01-23-2011 05:22 AM |
| low byte parity error | asantos | Spanish CNCzone | 0 | 11-01-2009 04:40 PM |
| 001 TH PARITY ERROR | jlviloria@gmail | Fanuc | 2 | 10-08-2009 07:26 AM |
| Ram Parity Error | rags | Fanuc | 14 | 12-19-2008 02:03 PM |
| | |
Linear Mode
