Bridgeport Series 1 Heidenhain 2500

[exhausted]

Hello, new to CNC Zone ,Hello everybody.
I have purchased a Bridgeport Series 1 heidenhain 2500 (the first controlled machine I have had) problem is I dont have an instruction manual, and there are a vast array to chose from ,which one should I get?
Also I beleve the serial number is under the bed ,I dont know how to use the controller to move it .
Has anyone got the basic information to move the table using the controls
I would love to see it move.
Thanks for any help John

[gridley51]

You can download the Heidenhain manuals from here.Note that all the capabilities listed in the manual may not be on your machine.Machine builders only selected the features they wanted.
https://filebase.heidenhain.de/doku/...3C/N1443C.html

[exhausted]

Thanks for the help ,downloaded the manual. John

[gridley51]

John,PM me if you get stuck.Are you anywhere near Broxburn?
Mark.

[shujah]

does any body help me to find the temperature sensor in control cabin in TNC 2500. i have TNC operation temp. exceeded problem and then my machine stuck.
but the autual temperatuere inside the control is not more than 20 degree C.

please help me.

[shujah]

i have the solution. when you on the machine the control itself provide 5 V DC to RAM IC. so disconnect the power supply 5V DC battery . or simply add a switch to operate when your machine is on. please make parameter backup. and you will not get any further TNC Control temperature exceeded again ever.