Manual needed to Romi/Bridgeport CNC lathe - CNCzone.com-The Largest Machinist Community on the net!

mgreene · #1 02-15-2005, 02:49 PM

I work at a two year college in northeast Arkansas and we have recently acquired a Romi/Bridgeport EZPath CNC lathe. Unfortunately it came without an operators manual or programmers manual. The manufacturer has been unable to help and we would really like to have these manuals …. especially the programmers guide. I have pictures of the lathe on our website at http://support.blackrivertech.org/romi.htm if there any questions as to model or series. Can anyone out there help me out?

Thanks,

Mike Greene
BRTC

JFettig · #2 02-15-2005, 03:19 PM

We have 2 of these at work, but I am not working untill this semester in college is over, what kind of questions do you have? I might be able to help.

Jon

machintek · #3 02-15-2005, 03:20 PM

From the picture, you have the original EZPATH 1. It does not have CSS (constant surface speed). I believe you can find a programming and operating manual on CDROM at machinemanuals.net. If there is anything else you need, let me know.

George W.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using your CNC Mill as a CNC Lathe	lstool	Knee Vertical Mills	10	08-02-2010 01:06 AM
Manual lathe CNC conversion	kong	General Metal Working Machines	10	08-20-2005 04:56 PM
Are ballscrews necessary for PRECISE work on a cnc lathe?	daytrader	General Metal Working Machines	15	01-10-2005 01:34 PM
Pictures of My Lathe & CNC MILL	studysession	General Metal Working Machines	14	01-04-2005 05:07 PM
Advice needed: Buying a CNC vs retrofitting a manual	jkeyser14	General Metal Working Machines	0	11-17-2004 01:03 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)