Problem- Anilam CrusaderM + RS232

[Hythos]

Hi Gang;

I use Predator to upload to the control, however the program doesn't come in accurately. Although, I can send from the control back to the computer and it comes through clean.

The Anilam uses AUX-170x (when x = 0 = send FROM control to computer in RS-274, 1 = send TO control form computer in RS-276, 2 = send FROM control to computer in "Anliam" format) to upload via RS format, though is it possible the communication is not operating at the same "mode"? (232 vs 274, ect).

I'm very familiar with port communication on computers, though not quite so with the various RS modes to machine-controllers... So I'm curious to know if this could pose a block or mis-communication to the control. I've used the manuals' step-by-step procedure, but it's not working correctly. Also, if anyone has had experience with the Anilam Crusader M and could give me any tips, I'd appreciate that too.


Thanks!