Need Help!- BOSS DX32 [F7] MK DIR

[minton]

The following message is on the FILE screen.

Enter Path DRIVE:\DIR\ <ENTER> <.>=WorkDIR
C:\

Please type in a sample command to MK DIR



Many Thanks for the HELP!

Regards,

Bob

[beege]

If it were me, I'd go into a system prompt (never used a BOSS before).

If you want a directory called "work"
at the "C:\" prompt, type "md \work", without the quotes, and hit enter.
Then you can go back to your file screen and name that as your work directory. There's probably a way to do that from within the DX32 system. Been way too long since I used a DX32 of any sort.

[minton]

beege:

Many Thanks for your suggestion, I will try it later today.

Regards,

Bob