Bridgeport Series 2 Interact 4 CNC Control Parts

[Gnome]

Hi all,
I am in the middle of a CNC retrofit on my Bridgeport Series 2 Interact 4 mill. I will be selling all of the control components from the mill, including the servo motors, all drive components, DC spindle drive motor, DC spindle drive...

Basically i am selling everything from the controller and the spindle drive components and only keeping the iron.

I am planning on listing these items in the coming weeks on ebay, however please PM me if you are interested. This would be cheap backup components for anyone with the same control.

Cheers!

[Jurek]

How old is the machine and what type control. Jurek

[Gnome]

The machine was built in 1989. It has a heidenhain TNC 2500 control.

[Jurek]

My machine is from Feb.1988. It has 151control. I have spare servo motors. Wonder if drive cards are same./maine are Bosch Z15-1A-240V/.Thanks Jurek

[bk1955]

I have a similar machine, do you have a list and prices made up or would you post a reply as to when these items will be on eBay?

[Gnome]

Jurek,
The part number of my drives are Z15-1-240V (very similar, but am not sure what difference the 1 vs 1A makes?). The number below the part number is 035883-113

bk1955,
I have uploaded pictures of most of the major components that i will be selling on ebay. These include the motors, the axis drive boards (3), the spindle drive, MT1 board, the main breakout board, the hand pendant, and the spindle motor. I also plan on selling the transformers at some point. If there are any other components you need please let me know. Please see the following for pictures (26 total):

http://s563.photobucket.com/albums/s...%20Components/


I would be happy to work out a price for all the items you are interested in. I have PM'd you my phone number. I will be listing these beginning in March on ebay if nobody else on the zone wants them...

[JHCHOPPERS]

I have 3 Bosch Drivers and a Power Suplly I need to move. If your interested please PM me.



Thanks,
Joel

[Jurek]

I am interested. It is not from INT 4. I like talk to You over the phone.Jurek

[hectorbach]

Originally Posted by JHCHOPPERS I have 3 Bosch Drivers and a Power Suplly I need to move. If your interested please PM me. Thanks, Joel

Hi JHchoppers..! do you still have the Bosch drivers for DC motor at the bridgeport TNC2500..?

[JHCHOPPERS]

Sorry, but I have I sold off all the old electronics.

I have have started the Mach3 Conversion, you can see the build...

http://www.machsupport.com/forum/ind...c,13365.0.html

Thanks,
JH

[dcchip]

I have one of these machines but did not have any holders when I purchased. Do you know what type pull stud? Manual just says iso 40 taper which from my research says I can use cat 40 as long as I get the correct retention knob. Thanks!