Interact 1 Mk2 parameter

[crazeekev]

Does anyone know what value the parameter MP0 should have?
It's on a TNC 150 controller.


Cheers

[gus]

should be x axis max feedrate. Ought to be the same as the next [y axis] and usually,but not always the 3rd[z axis]

5000 on my machines, but they are not exactly the same.

changing this number will make your servo amps out of adjustment[IE gross positioning error]

[crazeekev]

Thanks Gus!
Thats exactly what mine is doing. I put in 4000 thinking it might be that and was getting a gross positioning error on the x axis. I have changed it to 5000 but still getting the error. Any advise on what to do?

Thanks again!

[gus]

well , this must be related to your other problem........