Need Help! Bridgeport interact 412 W/ Heidenhain 2500 control - Page 3 - CNCzone.com-The Largest Machinist Community on the net!

RMARCH · #25 09-15-2008, 12:19 PM

Hi Guys,

I Finally got the PSU1 ( power supply ) and it was not my problem. Looks like i will have to try PSU2.

Any other ideas before i change the power supply in the control ? Before i change it i will try and see where the power stops like George said before.

The spindle motor and the axis drive board fan comes on and the 110 outlet works at the control but none of the relays or drive boards light up. Could my problem be a transformer?

Thanks
Ray

RMARCH · #26 09-16-2008, 10:48 AM

I Changed PSU2 in the control and still the same problem. I don't know where to go from here......Guess it's time to call a service tech.

Any more suggestions would be helpful.

Thanks
Ray

RMARCH · #27 09-27-2008, 07:06 AM

My Problem was PSU2........I was mistaken thinking another board was PSU2 that is in the control. PSU2 was in the side cabinet.... DUH !!!..........LOL

Thank you everyone for all the help !!

Ray

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bridgeport Interact - Heidenhain TNC 2500	nycooh	General CNC (Mill and Lathe) Control Software (NC)	3	06-08-2011 03:01 PM
Bridgeport Interact 1 - Heidenhain 2500	nycooh	CNC Machining Centers	2	07-26-2009 04:40 PM
Bridgeport Serier II Interact 4 (Heidenhain TNC 2500)	elhosseiny	Bridgeport and Hardinge Mills	15	11-21-2008 05:28 PM
Bridgeport Interact 1 - Heidenhain 2500	nycooh	General Metal Working Machines	0	06-25-2007 03:59 AM
Bridgeport Interact 1 - Heidenhain 2500	nycooh	CNCzone Club House	0	06-25-2007 03:56 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)