Need Help!- Language settings?

[RixPox]

So, we got this Bridgeport INT 412 with Heidenhain TNC 155, so where in the menu/parameters can we change the language of the machine thingy?

[gus]

I think it might be in 'user parameters' but am not sure. the 155 manual should be on the heidenhain website OMA controls section

[gridley51]

The language can`t be changed by parameter apart from changing from the language that was ordered to English.What I mean is that if for example the control was ordered with German language you would be able to set either German or English.You would need to order a part from Heidenhain if you need to change it.
Mark.

[kdhBOSS5VRAM]

Hi,
If you mean to switch from Heidenhain conversational to ISO G-code I think you have to use the MOD button then cursor to User Parameters and press ENT. Then cusor to the Dialog=0/Iso=1, then press 0 or 1 and I think the DEL button. I think control shuts down or you have to shut it down, then when you bring it up it will be converted, programs and all. There is a clip on keyboard for the ISO programming that goes over the conversational buttons. We never use ISO but I've tried this long ago just to see what happened.

Kevin

[bbrreid]

parameter 92 change to 3 or 2 for english .
1= german (decimal point )