I have gotten to the point with my Interact Series with Heidenhain 151B where I can start a transfer with TNCserver, but it errors out. What I found was the featurecam post was adding orphaned m codes and f codes.(just an m no number to many lines of g code. I edited the post and got rid of most of them, but I still get them after a particular line.Like this.
N50 G83 P01-0,1 P02 -0,2503 P03 -0,2503 P04 0 P05 47
N60 G01 G90 Z1,0 F6000
N65 G01 Z1,0 F6000 M
N70 T1 G17 S1500
N75 G01 X1,25 Y2,75 F
It wasn't erroring on the orphaned F code or the Feed on the line by itself but it may. If I manually remove them it transfers fine.
I was wondering if anyone could shed any light on the situation. I'm using the featurecam 2006 intgi post processor. Anyone have a modified working Featurecam post processor for g-code(not heidenhain conversational).
One other question, when I connect tnc server to my machine, how do I make it dripfeed instead of loading everything at once.It's not an issue yet as I'm still trying to get everything sorted out, but some of the things I'll be running will be loooong files. I'm running Windows xp with TncRemoNt and TNC server.Any help would be much appreciated, I'm ready to pull my hair out at this point!