G-Code for Bridgeport

[Holzwurm56]

Hello ,
i am using a Bp EZ-Trak series 2 cnc . It`s very difficult to create programms with the build in midi mode . Does someone knows a camprogramm that producess a G-Code for the EZ-Trak . I get allways the message invalid G-Code .
Many thanks for every answer
Hans

[kdhBOSS5VRAM]

EZ Cam has 2 posts for the EZ Track. I don't know which one is correct for your machine but I posted a sample with each cutting a 2 inch square .5deep.


N1 (PROGRAM START) (STEP1) PNEZ G20 G90 T1 CR0 ;
N2 G0 X1.0 Y-1.25 Z15.0 ;
N3 (Z RAPID) Z0.05 ;
N4 (Z RAPID) Z-0.5;
N5 (LINEAR MOVE) F10.0 G1 X-1.0 ;
N6 (CIRC MOVE) G2 X-1.25 Y-1.0 XC-1.0 YC-1.0;
N7 (LINEAR MOVE) F10.0 G1 Y1.0 ;
N8 (CIRC MOVE) G2 X-1.0 Y1.25 XC-1.0 YC1.0;
N9 (LINEAR MOVE) F10.0 G1 X1.0 ;
N10 (CIRC MOVE) G2 X1.25 Y1.0 XC1.0 YC1.0;
N11 (LINEAR MOVE) F10.0 G1 Y-1.0 ;
N12 (CIRC MOVE) G2 X1.0 Y-1.25 XC1.0 YC-1.0;
% ;
(FILE END) ;

or for the EZTrack SX

0000 EZTRAK|3X 1 MODE|INCH |NON COMP 05 01:00:01 1998
0002 AUXFUN T1 M6
0003 RAPID ABS X1.0000 Y-1.2500 Z0.05
0004 LINE ABS X1.0000 Y-1.2500 Z-0.5 F5.0
0005 LINE ABS X-1.0000 Y-1.2500 Z-0.5 F10.0
0006 ARC|CNTRPT ABS CW X-1.2500 Y-1.0000 Z-0.5 XC-1.0 YC-1.0 F10.0
0007 LINE ABS X-1.2500 Y1.0000 Z-0.5 F10.0
0008 ARC|CNTRPT ABS CW X-1.0000 Y1.2500 Z-0.5 XC-1.0 YC1.0 F10.0
0009 LINE ABS X1.0000 Y1.2500 Z-0.5 F10.0
0010 ARC|CNTRPT ABS CW X1.2500 Y1.0000 Z-0.5 XC1.0 YC1.0 F10.0
0011 LINE ABS X1.2500 Y-1.0000 Z-0.5 F10.0
0012 ARC|CNTRPT ABS CW X1.0000 Y-1.2500 Z-0.5 XC1.0 YC-1.0 F10.0
0013 AUXFUN T1 M2

[wcarrothers1]

I know Vcarve comes with eztrack post processors..

I'm using a modified one on my boss 10 machine with much success..

Vcarve is a great package for the money (in my oppinion)

b./