| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-14-2008, 09:36 AM
| |||
| |||
We have a 96 torqcut 22, in setting up the machine we have been able to extablish x and y ABS but when we follow the manual to set z and then run the program we are 10 to 12 inches above the part. What are we doing wrong?  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Z axis problem | zephyr9900 | Tormach PCNC | 7 | 12-20-2009 07:43 PM |
| z axis problem? | automatic | Open Source CNC Machine Designs | 1 | 12-10-2007 08:04 AM |
| Z Axis problem | studysession | Mach Software (ArtSoft software) | 2 | 05-05-2007 06:06 PM |
| z axis problem | UMASSREHAB | TurboCNC | 1 | 09-29-2006 05:45 PM |
| Z-axis problem | Trainhound | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 12-14-2005 02:24 PM |
| | |
Linear Mode
