Crusader II manual

[harvard5]

I bought a Bridgeport mill with a Crusader II control and would like to know where I could get a copy of the installation manual for this control. I have the operating and trouble shooting manuals but the machine was taken apart and I need to figure out if I have all the parts and were they go!

thanks Bill

[MILLMANM]

Harvard 5
I Have A Crusader 2 Also And Need To Find Out What Color Wire Goes To Tb1 Connection On The Power Supply They Are Purple And Gray And The Run To The Servo Relay 1 Wire Should Have Around 30 Volts But I Dont Know Which One
If You Can Check Thanks For The Help
Brad

[harvard5]

I'll try to find out if I have time this weekend.

Bill

[MILLMANM]

Thanks Bill
I am working the weekend shift so I will not get any time tiill monday anyway
thanks Brad

[harvard5]

I opened it up and checked today and found out mine uses an older style board that dosen't even have that connector on it.From my wiring diagrams yours uses a PCB 435 date 1985 mine uses a PCB 425 date of 1980. Do you have the wiring CD that someone is selling on E-BAY? I bought one and it's great! all the diagrams and a trouble shooting manual. But I can't find the wires you'r looking for (sorry)

Bill

[MILLMANM]

thanks Bill , Iwill look for that cd
Brad

[arena]

Any chance of a copy of that cd as I need help with my crusader II?

[MILLMANM]

arena email me i think i have a file with some troble shooting info on it also a wire diagram, best best is to upgrade ,best thing to do.