| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-30-2008, 06:23 AM
| |||
| |||
Hi, I have some problem with this VMC1000 machine with a Heidenhain controller TNC426. After doing some repair on the ER module (seimens). We have got the 600VDC to the bus bar supplying to the Drives. The machine is able to power up. After running a program, the machine comes up with a "Motor Z:- Speed not equal to Imax" and "Excessive servo Lag in Z". What could porbably be the problem. Hope you gentlemen could give me some thoughts. thks    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Upgrading a 2000 Hardinge VMC1000 fanuc omd | sco999 | Bridgeport and Hardinge Mills | 2 | 04-14-2007 03:22 PM |
| Basic questions about Bridgeport VMC1000 with Heidenhain control | Roe Racing | Bridgeport and Hardinge Mills | 9 | 03-02-2006 05:54 PM |
| Material for mould | CarbonMike | Glass, Plastic and Stone | 5 | 11-07-2005 02:06 PM |
| electrical prints VMC1000/22 | AlexCNC | Bridgeport and Hardinge Mills | 9 | 10-07-2005 12:20 PM |
| Sanding a mould | MBG | Moldmaking | 5 | 09-26-2005 01:45 PM |
| | |
Linear Mode
