TNC2500-Bridgeport 412 Parameters - CNCzone.com-The Largest Machinist Community on the net!

paulmenday · #1 01-24-2008, 07:39 AM

Can anybody help me?
I have a Bridgeport 412 interact with 12 station tool changer and TNC2500 control, The machine lost all programs and parameters.
I need to reset parameters:-
NC SOFTWARE 24300012
PLC SOFTWARE 25014408
Thanks to anyone who can help!!

mcwmah · #2 01-30-2008, 06:46 AM

i have some MP's with me which may help but i do not know how to attached to here. Maybe you could write to me at my mail jasonmah@bmtsb.com.my. anyway i trying to attached it here with a pdf file of the MP. Hope it helps.

machintek · #3 01-30-2008, 11:52 PM

Careful! 412 and 760 parameters can be very different.

George

mcwmah · #4 01-31-2008, 01:51 AM

ya..it is a parameters for the 760 TNC2500..and not all the parameters are use on the 412. sorry forgot to tell him to be careful.

paulmenday · #5 02-01-2008, 03:22 AM

Thanks.
I managed to get the parameters from Hardinge, all ok now.
Paul

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bridgeport Interact 520/Heidenhain TNC 155 initial parameters	jeromir	Bridgeport and Hardinge Mills	10	08-30-2010 06:01 AM
Hiedenhain TNC2500	nikinet	Bridgeport and Hardinge Mills	2	01-28-2010 08:16 PM
Plz help: Lost all the parameters on our Bridgeport	Oviksnc	Bridgeport and Hardinge Mills	20	09-30-2007 12:15 AM
Bridgeport Interact 412/Heidenhain TNC 250 initial parameters	pedrow	Bridgeport and Hardinge Mills	11	04-04-2007 01:09 AM
anyone need interact 4 electronics? TNC2500	camarogod98	Bridgeport and Hardinge Mills	1	01-31-2007 04:48 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)