| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
01-06-2008, 01:58 PM
| |||
| |||
| I used a DL06 from Automation Direct for my lathe. It controls Rear turret (6 position) Front Toolpost (4 position) Gearbox (5 electromagnetic clutches) Chuck Open/close Spindle Fwd/Rev Spindle motor Hi/Lo speed range Signals for Front coolant, rear coolant And about 5 or 6 button Inputs to Mach. The PLC uses ModBus to talk to Mach and you can add lots more I/O to the PLC including analogue. Hood  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| moog run for your life bridgeport ! | otpco | Bridgeport and Hardinge Mills | 20 | 11-23-2011 09:54 PM |
| Moog Toolchanger | WEDM | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 02-26-2011 07:20 PM |
| DNC with Moog Hydrapoint III | computerflummi | Machine Problems, Solutions , Wireless DNC, serial port | 6 | 03-19-2007 05:32 PM |
| | |
Linear Mode
