bridgeport 412 manual needed

[windy]

Hi, newbie here.
sorry its a want first post but Im off to work be back later.

anyway, Ive just purchased a Bridgeport 412 VMC (10 tool carousel) it came with a Heidenhain tnc 360 programming manual which is close to the 355 I have installed.

my request is , does anyone have a installation/users manual that I could have or a download of one as need to make sure the basics of refitting the guards for a starter, then maintainance are done right first time so I dont get coolant everywhere.

thanks

[doctordemo]

Originally Posted by windy Hi, newbie here. sorry its a want first post but Im off to work be back later. anyway, Ive just purchased a Bridgeport 412 VMC (10 tool carousel) it came with a Heidenhain tnc 360 programming manual which is close to the 355 I have installed. my request is , does anyone have a installation/users manual that I could have or a download of one as need to make sure the basics of refitting the guards for a starter, then maintainance are done right first time so I dont get coolant everywhere. thanks

try machinemanuals.net
i am new to this site also, it is awesome!
steve

[windy]

Hi Doctor...
I looked there before posting here, I couldnt see a manual for the 412 cnc , maybe someone might know which version of Bridgeport is the 'Boss' one that is advertised? or if any good for me...

[RMARCH]

Here is the link to Heidenhains website. You can download the manuals here.http://filebase.heidenhain.de/doku/o...D8/N143D8.html

[windy]

thanks, but as I said initially, I have a heidenhain manual I need the machine setup and maintainance manuals. Ive asked bridgeport but not had a reply yet.

[gus]

Are the older vmc's all the same/ similar? IOW, all the old 17x12 machines use a common frame, so with a heid manual and a manual from a dx/fanuc/whatever controlled vmc you would have 80 percent of what you need

[windy]

spent most of last night re fitting guards, all ok apart from I have one piece left over, sort of box shaped 3 sides with 3 bolt slots around 9"x6"x4".
looks clean and not oily or been anywhere where swarf could have removed the paint?

need to check which wires of the 3 phase goes to where on the suds pump.

[windy]

still looking for a installation and service manual for the Bridgeport 412. programming manual Ive got but not much use unless I can get the thing connected to electric!!

looking for info on what colour wire goes to where on the coolant pump also what colour wire goes where on the mains feed into the breaker switch.

UK model so does it make a difference?

help

[windy]

still looking, just found one on ebay for $10, the clown wants $83.80 to mail it!!
another example of rip off shipping charges onebay.