Interact 4 SII, electrical problems. - CNCzone.com-The Largest Machinist Community on the net!

Oviksnc · #1 10-21-2007, 07:36 AM

Hi, we was using our old Nc mill yesterday and everything was working fine. Until the 3´rd time we ran the program. Then the whole mill started to vibrate and sounded really wierd. Suddenly it stopped and error message Large position error occured on the screen. We restarded the d*mn thing and now it wont activate the relay for the "Power on" function to the servos ( yellow button ). I´ve measured the button and there nothing wrong there, is it possible that it could only be the relay that´s broken? Or is there anything wrong with the servo motors?

Please does anyone have any clue?

/Johan.

machintek · #2 10-22-2007, 07:56 PM

Possibly the spindle locked up and tripped a overload? Started to single phase and tripped an overload? Check all fuses.

George

Oviksnc · #3 10-23-2007, 02:48 AM

Thanks. I have hooked the machine up on a different 380V feed. We ran yesterday without any problems. Hope it continues that way.

Thank you!!

/Johan.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bridgeport Series II Interact 2 problems	gugu	Bridgeport and Hardinge Mills	24	01-10-2011 07:34 AM
Bridgeport interact 520 Wear compensation problems.	mustangillusion	Mastercam	0	03-15-2007 04:59 PM
Electrical Interference	Scratch	CNC Plasma and Waterjet Machines	0	01-13-2007 10:49 AM
Sieg X3 electrical problems	JonathanK	Benchtop Machines	2	04-30-2006 12:34 PM
Bridgeport Series II Interact 4 & Heidenhein Problems	UKRobotics	Bridgeport and Hardinge Mills	10	04-03-2006 02:27 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)