TNC151B parameters

[Mike Conboy]

Does anyone have a parameter listing for a Bridgeport Interact Series I - MK2 with a 151B Heidenhain controller. We have a listing for a 151A controller but the 151B has a whole bunch of additional parameters.
Many thanks to anyone who can help.
Regards
Mike

[RMARCH]

Here is the parameter list.

[gridley51]

Mike,you can download the manual from the Heidenhain site which will explain each parameter.
Be careful with the software limits settings if using parameters from another machine.
Here is the link.

http://filebase.heidenhain.de/doku/o...40/N13C40.html

Mark.

[Mike Conboy]

Many thanks for the program list but it does not seem to be for a Heidenhain 151B controller. It has parameter numbers which do not exist on the 151B.

I have the manual from the Heidenhain web site but some of the parameters are very difficult to determine. A real parameter list for a 151B controller would help.

We have entered numbers which allow us to control X,Y and Z axis but cannot get the spindle to operate. Not sure if we have got a parameter wrong or if there is an electrical fault. We do not have electrical schematics for the spindle drive enclosure - can anyone help please?

[RMARCH]

Maybe this will help

[machintek]

It could be a spindle drive issue if the parameters are correct and the machine does home.

George

[gridley51]

Second what George says but I would also check how params 62 and 63 are set.
I`ll PM you the tel. no. of the guy you need to speak to.He will have a param list.
Mark.