V2XT (and other stuff) needs a new home

[NC Cams]

Small shop and hobby machinists TAKE NOTE:

I have a late 90's V2XT with the BMDC controller. It has all the manuals, software and is pre-fitted fitted with the somewhat rare FACTORY 4th axis servo amp - a Bridgeport/Troyke 4th axis plugs and plays. IT is literally 4 axis ready, not merely "factory wired" as most are.

The machine is VERY clean and it has NO road rash. It comes with tooling and quick change spindle. Sorry, no power draw bar. Again, all manuals and software go with it along with a CD containing LOTS of other Bridgeport service and tech info that is real hard to find/come up with.

A recent change in my business focus necessitates that I sell and move out the V2Xt.

Wait!!! There's more.

I also have to sell off 2 of my 3 Fanuc 5T 10hp DC motor powered NC lathes. With the lathes also goes 2-3 sets of spare M/B's, memory boards and lots of other spare, hard to get/find stuff far too numerous to mention. I need the space and thus need to sell them as a bulk sale as much as possible as opposed to doing so in bits and pieces.

I also need to sell an Excello manual mill with DRO and R8 spindle. This mill is in GOOD/VG condition and recently had the motor completely rebuilt (rewound field, new bearings, balanced,etc).

Everything comes with FULL documentation and/or manuals.

Long story but not a sad or desperate one - vultures and/or tire kickers need NOT apply. Reasonable and serious offers/discussions ONLY please as the days are quite hectic with other business issues.

Contact via P/M first, visitation by appointment ONLY.