Bridgeport Inreract 1 - TNC 2500 Control

[nycooh]

Hey,

Anyone out there anything about this dinosaur? Not conversational control. ISO programming. Only 1 fixture offset? Can't find the central tool file program. Help!!!

[machintek]

ISO or conversational. Selected by operator under the MOD key. It has a magnetically held ISO keyboard over the conversational keys.
Start looking for manuals.

George

[RVR]

I will try to help you
Excuse, for my bad English.
You must change machine parameters (MP) in machine.
Press MOD key in operating modes area, with arrows go up or down until you see CODE NUMBER:, type 95148, press ENT key. Now you are in edit MP mode.

These MP make problems to you:
MP 7222 (1-Heidenhain dialogue, 2-ISO code)
MP 7260 (0- no central tool file, 1-99 - number of tool in ctf)

Now press GOTO key and type 7220 and see your number( must be 2), if you wish to change to 1, type 1,
press GOTO key, type 7260 (this MP must be 0) , type number of tools which you want to have in ctf.
Now you press END(whith square symbol).
Axes will be lock out and you must turn on.

All procedure and MP discription for TNC 2500 B, download from:

http://filebase.heidenhain.de/doku/o...D7/N142D7.html
If you have any problems send me a private mesage.
Best wish

[gus]

conversational has unlimited offsets, so I would imagine there is a way in g code