Drip Feed Boss 6

[TPMX]

I know this has probaby been covered before but I will ask again.
I need to send small programs to my Boss 6 and would like to know the best software to use and how to hook it up.
i would like to use win2000 or xp if possible.
THANKS

[machintek]

This has been covered many times but do not search for drip feed in the search. Unless you have the optional DNC loader, you cannot drip feed. You can load using RS232 or 20ma current loop. I carry a DOS version of PROCOMM. It talks to the Bridgeports, Fanucs and Heidenhains. It runs on a old Compaq 233MHz laptop with WIN95.

George

[rick@netpipe.co]

I purchased this SIMPLE kit. Have a Boss 6 CNC and found
1. easy to set up
2. easy to use
3. very inexpensive
4. MOST OF ALL, IT WORKS. and the documentation is so straight forward that an idiot could set it up and use.

http://cgi.ebay.com/RS232-Cable-For-...QQcmdZViewItem

If you want to know more, send me an email rick@netpipe.com