Bridgeport series I CNC schematics

[Jonne]

Have anyone bridegeport series I CNC BOSS 3/4 schematics?
I will gratefull if somebody can send me those to johannesthelen@hotmail.com

[pestana1957]

Hi Jonne

you can find all you ned at this site good luck

Pestana1957

http://filebase.heidenhain.de/doku/o.../de/index.html

[gus]

Yer gonna drive him crazy, no BOSS stuff there......

[Jonne]

Sorry, it's Boss 6, I find out...
And I'm not going crazy, about that, yet.. :]

[TPMX]

I have all the drawings for a SERIES II bOSS 6 if all will help let me know I will copy what you need.

[Jonne]

Great! If you can, put those to my E-mail: johannesthelen@hotmail.com
Thank you very, very much!

[machintek]

If you are using data from a U>S> machine, be aware that there differences between a BOSS 6 and a BOSS 6.1.
Attached is a sheet with some of those differences.
I looked for the transformers. I have no data on them except the part numbers and what part number is what (50hz or 60 hz etc).
It is part of the attachment.
T6 is the 56 V transformer used for current limiting with the ACC board and T7 is the 24V power supply.

George

[Jonne]

Yes, thanks!