Help with programming of tnc151

[gus]

heidenhain.com......

[PRIOR666]

mmm i wiil see look for it
thank you gus.

[awemawson]

THe manuals are all available for download on the Heidenhain site or you can find other resources like:

http://faculty.etsu.edu/hemphill/ent...htm#top-o-page

[PRIOR666]

this is exactly what looked for, this will help me a lot,
thank you very much awemawson, you are really awesome.

[bbrreid]

0 BEGIN PGM 100 MM
1 TOOL DEF 1 L0,000 R0,000
2 TOOL CALL 1 Z S1000
3 L Z+50,000 F9999 M03
4 L X0,000 Y0,000 F9999 M (tool change position)
7 L Z0.000 F9999 M (job surface)
8 L X0,000 Y0,000 F9999 M (going nowhere)
9 L Z+50,000 F9999 M (back up to tool change position)
10 R F M06 (tool change)
11 TOOL DEF 2 L#### R##### ( new tool info)
12 TOOL CALL 2 Z S1000
13 L X0,000 Y0,000 F9999 M (going nowhere)
14 L Z+50,000 F9999 M03 ( z going nowhere spindle c/w)
15 L X-42,500 Y+42,500 Z+50,000 R0 M (feed missing z going nowhere)
16 L X-42,500 Y+42,500 Z+3,000 R0 M ( z 3mm above job)

jog z up to near limit switch set Datum to +80 then touch No1 tool on top surface and input "0.000" Datum