| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-14-2006, 08:29 AM
| |||
| |||
I just brought home a 88 Bridgeport R2E4 It was partiially dissassembled In order to get it out of the school where it came from. ( i was not present) I have not gotten the manuals yet. (they are supposed to be coming) my question is: is there some sort of spacer between the spindle motor and the head assembly. the bolt length and paint indicates there was some sort of spacer there. if someone has a manual with the exploded diagram of the head and could scan it that would be great Thanks archie =) =) =)  |
|
#2
10-14-2006, 11:10 AM
| |||
| |||
| Spindle motor bolts to the bottom of the belt housing. There is a metal plate that covers the hole in the top of the belt housing. George
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
10-14-2006, 11:45 AM
| |||
| |||
| i have a 86 R2E4 send me your e-mail and i will send you 2 pages that might help. theguild4@comcast.net |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
