Bridge Port Textron opreating mannual required..

[Danii]

Hello all,

I have and old Bridgeport series1 milling machine and Bridgeport Textron Controller is attached with it .. The control is working in mannual mode and three axes are working.. Now i want to feed the data from PC using BOBCAD-CAM software to this Textron Controller. But i dont know how to opreat it as i dont have its programming and opreating mannual. If some body know where i can get or can share with me then lots of thanks for them..

Regards...

Danii..

[NC Cams]

Try MachineManual.net.

Make sure you have the full model and operating system information.