Help with O mate control - CNCzone.com-The Largest Machinist Community on the net!

Regal · #1 01-17-2006, 01:51 PM

Does anyone know how to toggle between "absolute" and "relative" displays when in the program check mode? It always used to be displayed in absolute but somehow it got switched to relative.

machintek · #2 01-17-2006, 07:22 PM

Call Fanuc. They may help. You must have a Discovery 308 with the 0M MATE control. I found that control very tedious. You have to cursor over to anything you want to do. Very time consuming. Do you have a parameter manual? The answer may be in there.

George

Regal · #3 01-18-2006, 06:26 AM

Thanks for replying. It ia a GE Fanuc Series O Mate-M on a Bridgeport interact 720. You're right though, it is a very tedious control and you must go from window to window to accomplish anything. I do have all the manuals but they are just as useless. It states that you can toggle back and forth between Relative and absolute but does not tell you how to do this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)