I NEED: DX-32 manual, 1104-2832 VMC Operator's Manual, DX-32 CNC Control

[vettespeed]

Hi,
I just purchased a 1995 Bridgeport Torq Cut 22 CNC and it came with 1104-2638 DX32 CNC Programmer's Manual and 1104-2803 Installation, Maintenance, & Parts Manual.

I NEED:

1104-2832 VMC Operator's Manual, DX-32 CNC Control.

This must be the manual that explains how to navigate around the control, set work offsets, H/D offsets, etc, etc. I've tried Bridgeport/Hardinge and EMI with no success.

Thanks, Mike.

Michael Ham
vettespeed68@hotmail.com
360-413-7561
cell 360-888-5655

[machintek]

Have you tried EBAY or www.machinemanuals.net?
Be aware that the operation manual is generic. Certain functions were added or deleted or moved depending upon the version of software you have installed.
Also your machine may or may not have a gearbox, and even then there are different spindle speed options.

George

[vettespeed]

Thanks,
It looks like they might have something on CD-ROM to at least give me some generic info on the control. If anyone else out there knows where to get the exact manual I mentioned, let me know. Thanks again, Mike.

[Jaguar]

Got it in PDF.

[vettespeed]

Can you sent it to the address in my 1st post? That would be awesome. Thanks a lot, Mike.

[mlbz420]

i have the opposite problem, i have the operators manual but i need the programing manual and setup manual.. maybe we can organize a trade???....

jaguar: you wouldnt happen to have the other two in pdf also would you?

[vettespeed]

I have all the paper manuals now and have the "operators" and "programmers" manual on PDF. I would still like to get the "installation, maintenance, and parts breakdown" manual on PDF, though. Post your email address and I'll send you the two PDF's I have. Hey mlbz420, give me your email address and I'll send what I have. ANYONE HAVE THE "INSTALLATION" MANUAL ON PdF!???? Please send to vettespeed68@hotmail.com if you do. Thanks all, Mike.

[mlbz420]

its mlbz420@msn.com. i to am also looking for the maintenance and breakdown manuals. ill keep you posted if i find anything. I belive i have the operators and programming manuals as of now but what you have may be different or better if you want to send them anyway.

here is a link to some more info that i got, it wont be there long so you may want to check it outclick here

[NC Cams]

The link posted in MLBZ420's post is dead.

If the group came up with the manuals in PDF, I'd like to get copies of them as well.

Email to nccams@provide.net

Please send them 1 at a time to not overload the server.

Thanks!!!

[RedGTZ]

Does somebody have these manuals on PDF? That would be great, I have them on paper but you never know what you can find new... thanks!

[NC Cams]

BUMP:

I have the following manuals in PDF:

11041860 VMC operator manual eratta
11042934 VMC operating manual addendum
11042832 VMC operating manual
11043351 Programming manual
11043287 G & M code list
11042638 VMC programming manual
VMC 800-1000 Maintenance manual, Chapter 4 ONLY (need the balance however in PDF to complete the book)

NEED Torque Cut Wiring Schematics and the parts list and maintenance manual(s) in PDF.

Have BIG TIME NEED for the schematic for the PWMINT card used in TC's and some other devices (P/N 31943304).

[szczepan]

how I can get it