We bough a Bridgeport 412 with Fanuc 0-mate control, and there in no key
in the operator control panel to unlock or edit the programs, so it must have a locking parameter.
Any body knows which one is it?
It has a really unfriendly user control panel, the manufacturing date is 1990.
A very rare machine. I have only installed one that I can remember. It would be best to call Fanuc and ask that question.
And yes, it is a chore to do anything with that control. Even going to handwheel of jog requires a bunch of arrow key strokes. Which makes me wonder if the edit lock has been replaced by key strokes just like the axis select and mode select.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)