| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-22-2012, 08:46 PM
| |||
| |||
I've been having problem with my machine dropping tool during tool changes. the program will call out an M06 and the spindle will unclamp the tool before it homes to the tool changer height. I was wondering if anybody had dealt with this problem before or might have an idea what is causing it to happen. Patrick  |
|
#2
01-23-2012, 08:13 AM
| |||
| |||
| The switch indicating to the control that the tool changer is forward is what triggers the tool release. Maybe this switch is bad. Otherwise, I would be reloading the software. George
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bridgeport Interact 1 Mk II - Ktk Drive Problem | palikalsi | Bridgeport and Hardinge Mills | 2 | 08-15-2011 04:47 PM |
| Problem- Bridgeport Interact 2 Series 2 Problem | theo1 | Bridgeport and Hardinge Mills | 4 | 06-05-2011 06:53 AM |
| Need Help!- Bridgeport Interact 720 memory problem! | FLjoyride | Bridgeport and Hardinge Mills | 5 | 10-28-2010 07:35 PM |
| Bridgeport Interact 24v DC reg problem | Paul_Leoni | Bridgeport and Hardinge Mills | 3 | 11-14-2006 03:15 AM |
| Bridgeport Interact 1 MkII problem | sparsrus | Bridgeport and Hardinge Mills | 13 | 05-02-2006 03:53 PM |
| | |
Linear Mode
