LinkBack URL
About LinkBacks
PLC is burned onto proms. Parameters depend on what control and what version of software (each version has a different amount of parameters).
George
| | |
Hello,
We have Bridgeport Interact 1 MK 2, we have lost parameters and plc program. We need help? Can you help me?
Best Regards.
PLC is burned onto proms. Parameters depend on what control and what version of software (each version has a different amount of parameters).
George
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
There is a thread on here where people can post thier machine parameters for the various different controls, you might find what you need on there.
Bridgeport Interact 1 Mk2 Heidenhain TNC 155b
Yes you can get help but first you have to tell what control it is and a bit of history.
Hello,
Thank you so much, for your intersts.
My machine has Heidenhain TNC 2500 control. Is this control's plc program burnt onto proms?
I will try parameters which i found on this forum.
I will inform results to you.
Best Regards.
Posting Permissions
| | |
