Need Help!- Software

[cncbpt]

Was there ever a conversational package or a cam program that was available as an add-on for a dx-32 control?
I need a way to make programs at the machine like would be possible in a conversational environment.
I need to do drilling-pocket milling-circular interpolation and threadmilling
right at the control and was curious if there was ever an add on package that would help for this
I realize this may be asking alot from a control from years ago.
I run a milltronics VM22 at work and the converational package on it is perfect for 2-D work and would like to be able to do even the basics on my TC22 without writing out the program

[BlueChip]

We have an lot of clients who place a laptop or old PC at the machine and utilize our Kipware conversational software to create their programs ... then upload them to the control. Old PC or a simple laptop are pretty inexpensive. Also makes it a good option as you can take the laptop anywhere ... like to another machine for example. You are not married to the machine and can utilize the system anywhere.

Info at Kentech Inc. - Real World Machine Shop and CNC Software