| | |
I'm hoping that some nice person out there might help me out of a jam...
Somehow my eztrak boot disks have become toasted, and I NEED the machine up and running NOW...if anyone out there would be able to help me out with the software (any version is ok at this point) so that I might make another boot disk, I'd be forever grateful.
Dcorn85@yahoo.com
FIRST: What version do you need? What vintage EZTRAK do you have?
You could get software overnight from EMI.
Second: I have tried emailing software to my service engineers and it did not work. Even tried zipping them but they would not unzip correctly. I eventually mailed them a image maker and then could email them a disk image from which they could create a good disk.
George
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
dcorn,Originally Posted by dcorn
If you haven't gotten a copy of a boot disk yet, I may be able to help. I have a '94 2-axis Eztrak that I could make a copy of my boot disk from.
Well, the boot disk that ate itself was Ver. 3.6...But as long as a newer version is still compatible, that'd be even better I suppose.
...And as far as sending a working copy, I have a couple good disk image utillities, so if you could send me a working image file I think I'd be back in business...
Well so far I'm still in need of one...so I'd take a copy if you've got one you could send me.
Posting Permissions
| | |
LinkBack URL
About LinkBacks
