boss5 to gecko

[hmoore01]

Looking for someone who knows how to wire Gecko to 6 wire steppers
I will be doing a complete conversion over Christmas vacation
BOSS5 to Mach3 using a breakout board and 3 G203V drives
I have coppied the end cap off one of the steppers
it has 8 terminals 2 jumpers and 6 power from boss5
the gecko use 4
can someone tell me what wire from gecko goes to each terminal number on stepper motor
and what to do with the jumpers
thanks for any help
Harry Moore

[Huckmeat]

I have the same setup, I'll try to get on my machine this weekend (been too busy with other pressing issues) and get you the pinout. I pulled new wire, so I'll take pictures and let you remap to your wiring.