| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-16-2005, 07:08 PM
| |||
| |||
I am using Bobcad to generate programs for my Boss 5 control. The only problem that I have run into is getting bobcad to put out the G75 needed to do a G02-03. Any one have any ideas. Thank you for your time Anthony Thayer  |
|
#2
10-16-2005, 08:46 PM
| |||
| |||
| What you want is to modify the post processor. Maybe you should try this in the CAD/CAM forum. George
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#4
10-17-2005, 08:05 AM
| |||
| |||
| Download and fill out the Post request form found on the post site ( www.bobcad.com/posts ). It is a PDF file at the top of the list. BobCad tech support will work with you and make the changes you need. This will benifit other customers as well. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Bobcad and a Boss control 
Linear Mode
