electrical prints VMC1000/22

[AlexCNC]

Hi everyone, does any of you have a machine like this, I need the electrical diagrams.
I asked Hardinge but they don't have them.

[machintek]

Great support from Hardinge, huh!
Is your VMC1000/22 with or without a CIB (control in a box). Is it Fanuc? Heidenhain?
Need to know to try and scan what I may have.
There usually was a set in the maintenance manual and a second set in the electrical cabinet.

George

[AlexCNC]

you're right, not good at all
thanks for the answer
I am sorry I didnt tell, it has a DX32 controller

I am new at this plant, first thing I did was looking at the manuals of all the machinery and I did not find these.

[One of Many]

Originally Posted by AlexCNC you're right, not good at all thanks for the answer I am sorry I didnt tell, it has a DX32 controller I am new at this plant, first thing I did was looking at the manuals of all the machinery and I did not find these.

Yoy might try contacting Electro-Mechanical Integrators Inc.

Are you have a current problem?

DC

[AlexCNC]

Thanks for the tip, I call them and they have it!!!!

I don't have a problem right now, but I would liek to have all the docs needed just in case

thanks again.

[machintek]

I am at the office and need your email to send you a PDF of the schematics. It is about 5 MB in size.

George

[AlexCNC]

malex_alv@yahoo.com

thanks

[tlhbear55]

i have a parts list for 1000 for automotive i worked at Hardinge Turnkey i put many in the automotive places and they needed all documentation on everything on the machine or just give them a call They have them Bull ----

[tlhbear55]

George is that Ha??

[AlexCNC]

thanks thlbear I already have them