I have a Bridgeport Series II with BOSS 6 controls It is an 1980 Or 81 Machine. It has on the front panel on the head aspindle Enable button,speed control, brake. and forward & reverse. My problem is it wont spindle enable.
I need the electrical schematic for just that part of the machine. I have most
of the rest of schematics. I hope somebody can help me. Thank You
Make sure your way oil level switch is working correctly. If the machine thinks it is low on oil it will not allow the spindle to start.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)