| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Bridgeport and Hardinge Mills Discuss Bridgeport and Hardinge Mills here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-20-2011, 04:08 AM
| |||
| |||
Hello. I have a tnc 145 with a blown power control supply board and a complete tnc 150 head unit. Am i better off trying to fit the supply board from the tnc 150 into the 145 box or swap the whole unit? Many thanks  |
|
#3
05-21-2011, 04:33 AM
| |||
| |||
| Thank you Gus I have opted to fit the control board as they look identical. (The 100 blue and red wires that were cut on the new box are a bit off putting!) Late last night the machine switched on and i hope today to re-do the parameters and see if it all works again. I cant see me using the helical threading facility of the 150. Am i missing out on anthing else by not using it? Cheers |
|
| Tags |
| heidenhain |
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is This A Good Swap | RUN-A-MUCK | CNC Plasma and Waterjet Machines | 4 | 03-23-2011 07:52 PM |
| TNC-145 - 150 control swap? | jkruger | Bridgeport and Hardinge Mills | 0 | 02-23-2009 03:17 PM |
| Spindle motor swap, or servo swap? | Chuck Reamer | Tormach PCNC | 28 | 10-09-2007 12:54 AM |
| Drawing swap | DLMACHINE | Rhino 3D | 2 | 12-19-2003 07:30 PM |
| | |
Linear Mode
