Newbie- High Speed Bridgeport Head

[cajun]

I am new here and will probably end up being a PITA. I have come across quite a few pieces that I will need to figure out what they are and their worth. Maybe even someone on here will be looking for something that I got from a shop closing its doors. I don't have any idea about some things that I got so I am hoping there will be alittle help here. To start with I know there is a high speed head for a bridgeport mill. Are these worth selling? It looks like it fits the older mills. I also ended up with some air chucks and such. Iappreciate any help and info. Maybe someone can tell me which forum I should post on if not this one? Thanks again for such a imformative forum.

[TOTALLYRC]

Post some pics here and people will help out.
If the head is an M-head I would be interested.

[cajun]

Heres a pic of the head. Thanks

[underthetire]

Worth selling, sure ! Thats a pretty old head though, and being a step pulley, not variable speed, probably not worth a whole lot IMO.

[tc429]

yeah, worth something for sure- personally I like the step pulley head better- the bushings in the variable speed heads were always a issue...hardly ever saw a step pulley head off the machines...the CNC in my garage I switched back to a old step pulley box on top- eventually will get a variable freq drive on it... the only thing I remember wearing on the step heads was the little pins/ring for the backgear shifter...