Need rh way cover for a cnc series 2 Bridge!

[cncboss6]

Hi All, I need a rh way cover for my CNC Bridgeport series 2 cnc mill. It had the 15"x30" table. I don't want to pay and arm and a leg, just a reasonable price. Just message me privately to arrange the payment and the shipping, Thanks Pat

[HawkJET]

Originally Posted by cncboss6 I need a rh way cover for my CNC Bridgeport series 2 cnc mill.

I have a Series II NC that I removed the covers from. I am pretty sure I have them stuck in a box under my bench. You're welcome to them. This is a picture of my machine to be sure they'll fit. As I recall, one of them may be bent a little, but nothing that should be a problem.

[cncboss6]

Hi Hawkjet, table and machine is the same except for the head. I have a 2j head 2hp but that should not matter. Message me on how much and shipping and I can oaypal you or send you a band cashiers check. I am at 13542 Vine st. Bath, Mi 48808. Thanks again, Sincerely Patrick Smith

[HawkJET]

I dug the covers out of the box. They are dirty as I removed them before cleaning the machine when I first got it. They don't appear to be bent as I had thought, and there doesn't seem to be a difference between them (no left or right). I'll get them in a box to determine shipping costs and we'll go from there.

[cncboss6]

Great HawkJet, Thanks a million. Let me know what I owe you, and how you want payment. Thanks Again, Pat