Need Help! Machine's parameters for a BP Series II Interac 2 with a TNC 151 - CNCzone.com-The Largest Machinist Community on the net!

FELMAR · #1 02-10-2011, 10:55 AM

I have a Bridgeport mill machine series II interac2 with a TNC 151 Heidenhain controller, the buffer battery was death and the machine's parameters was lost, can someone pass them to me. thanks.

fastcarl · #2 02-10-2011, 03:13 PM

try a search about 4 months back, i had the same problem and some kind folk posted up some links, i have a set filed in my docs but cannot paste them up, and my photobucket account has gone all weird lately,

carl

gus · #3 02-11-2011, 06:24 AM

they,or very close ones are here just keep looking

Sroe1 · #4 02-14-2011, 02:08 AM

hope this helps.
http://igor.chudov.com/manuals/Bridg...Parameters.pdf

FELMAR · #5 02-16-2011, 04:34 PM

Thanks to all, I used some parameter's list I found here and the machine is running.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Series OT Reset and offset parameters	tnik	Fanuc	6	03-10-2010 11:13 PM
BP Interac 1 And BP Interac 2	hancockj	Bridgeport and Hardinge Mills	4	11-19-2008 08:24 PM
fanuc series OM parameters lost	m_ghaff2000	Fanuc	3	03-27-2008 10:36 PM
Machine's DOWN any ideas	Clawsie Machine	General Metal Working Machines	9	11-22-2007 07:23 AM
Series II Special with 2J Head Milling Machine's spare parts	sareesultan	Bridgeport and Hardinge Mills	0	08-22-2007 06:41 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)