What Toolholder is this?

[astr]

I'm contemplation buying a Series II that is physically located a long way away so I've been looking at photos that the seller has provided. I already have a Series I with the QC-30 spindle so I'd like to be able to use my tool holders in the Series II. The photos that the seller provided of some toolholders and the spindle appear to be different than my QC-30. Can anyone identify these?

[wundertat]

They look like Kwik-Switch tool holders, 200 series possibly. Check link below to verify which ones you have:

Machine Tool Shanks (Tapers)

[astr]

Originally Posted by wundertat They look like Kwik-Switch tool holders, 200 series possibly. Check link below to verify which ones you have: Machine Tool Shanks (Tapers)

Thanks for the reply. Checked further and the seller confirmed that it was a Kwik Switch.

Can I assume that it is unrealistic to try and change it over to QC30?

[cheetahcnc]

Originally Posted by wundertat They look like Kwik-Switch tool holders, 200 series possibly. Check link below to verify which ones you have: Machine Tool Shanks (Tapers)

Thanks for the link. This looks the one I've been trying to identify for a gilman drilling spindle.

Jim

[mactec54]

astr

You can change out the spindle, they are quite easy to do