Need Help!- Bridgeport Torq Cut 22 CNC Vertical Mill

[US-GUN'S]

I would like to know the pros and cons of this machine because I'm thinking of purchasing I will basically doing aluminum but some steel I've done some work on a Haas and wonder if these controls are similar because I'm still learning

[tpmx57]

I have a Torque Cut 22 and I like mine real well
To me the DX32 was easy to learn and the machine works great for me.
I have had problems with my motherboard but was easy to replace with a old
486 computer motherboard.
This is only true I believe with the machines that were not built wit the C.I.B
My mother board was a stand alone that could be replaced easily.
There seemed to be problems with the battery that retains the CMOS
Once it starts leaking the motherboard will be lost shortly.
I have read of this problem several times.
I am very happy with mine and have made back more money by far than I invested in the machine
There are a couple things to look for before you purchase the machine and others on here will tell you more about that.
I was told to watch out for the C.I.B (computer in a box),too make sure it had a parvex z axis drive motor upgrade and to get any backup discs the owner has