Posting this here because i know some of you guys could really use this.

Sad to say but my Bridgeport vmc760/16 sufferent y axis ball screw nut mount damage underneath table. The machine is not repairable because no parts are available so i am going to sell the control off it before scraping the machine out.

This would be an awesome retrofit for a bridgeport vmc or maybe a TC if the servos bolt on.

This machine was retrofited about 5 years ago with a centroid (ajax) 5 axis control system. I am selling the complete control system with servos.

whats included

-centroid motion control board with PC motherboard and SD card reader
-SD3 AC servo drive
-(2) SD1
-(2) 2 KW AC servos (X and Y axis)
-rotary table servo
-Z axis AC servo
-PLCIO2 PLC board
-control pendant
-required cables to hook up the servo system.

This setup can run either AC or DC servos for the 4th and 5th axis.

The total for parts for this 5 axis setup was $11,000

Im selling for half price $6000

Parts are still installed on machine and you can see the control run in Dowagiac, Michigan
Give me a call if you interested: Jay 269-605-6224

Similar Threads: