I have the list of parameter of TNC 2500 of Bridgeport 412 interactive machine. this machine is equiped with Fanuc spindle drive and Bosch axes drives. machine maker is Bridgeport year 1992.
my email is bigw@wol.net.pk
attached is the file containing Bridgeport interact 412 with Heidenhain TNC 2500 control .
Ahmad Shujah
1988 Bridgeport Interact 412V TNC151 P control Parameters
Hi , I was wondering if anyone has the machine parameters for a 1988 Bridgeport Interact 412V Heidehnain TNC151 P control . I recently bought the machine and it had problems when i got it. ( I knew this ) I was just looking at the parameter list i got with the machine and it is for the TNC 155 control.
I'm not sure if they are the same or not.
Those searching for parameter lists, these are what we have seen here, if you get a working set for your machine, please post it here so the next person can find them.
And if you haven't saved your parameters, DO IT, and change the damn batteries, 3 AA's people
Machine Parameter For Bridgeport Series I Interact Heidenhain TNC 2500.
Software versions in title header of spreadsheet
Thanks for all the good info here.