How do you use your MP-11 Probe on your Bridgeport Torq Cut machine?
The topic might be a little specific as there are probably not too many people with that probe and machine
But that is what I have so I'm wondering how others handle offsets and setting for probing...
So far I have the machine and probe talking to each other and the machine will touch off then retreat from all three axis. I do have a floppy disk that came with the probe and I'm hoping it has some rare and long lost software on it, just have to fire up an old machine and install a floppy disk drive to read. I was worried that it might be best to open it outside the machine as I'm not comfortable with the controls and screen just yet.